Scrubber Cleaning Equipment
Product Code : (CGS-SASM-0307)
Category :Floor Scrubber
Feature:-
1. The brush can be assembled and disassembled automatically. In order to change the brush , press removing brush button to disassemble brush.On the other hand ,push the brush under the proper position firstly,and then press the assembling brush button to complete brush assembling .
2. The machine has automatic and manual operation mode.Under the automatic mode,all the function works by stepping on the accelerator.Otherwise,each function can also be operated by hands singly.
3. The squeegee is installed through a clasp.Release the squeegee clasp to change squeegee assembly.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Description:-
| Suction vacuum | 1880mm/H2O | Solution tank capacity | 170L | Recovery tank capacity | 180L |
| Traction speed | 200rpm | Traction motor | 750W | Brush motor | 2 PCS of 350W/36V |
| charger | 36V/25A | Duration of working | 3-5h | Battery | 245AH/6V/6 PCS |
| Machine dimensions | 190×89×135cm | Cleaning width | 86cm | Driving speed | 0-6km/H |
| Working capacity | 5100mm/H | Squeegee width | 120cm | Brush pressure | 0-45kg.f |
| Maximum gradient | 17% |
Feature:-
1. The brush can be assembled and disassembled automatically. In order to change the brush , press removing brush button to disassemble brush.On the other hand ,push the brush under the proper position firstly,and then press the assembling brush button to complete brush assembling .
2. The machine has automatic and manual operation mode.Under the automatic mode,all the function works by stepping on the accelerator.Otherwise,each function can also be operated by hands singly.
3. The squeegee is installed through a clasp.Release the squeegee clasp to change squeegee assembly.
